PLA / Parklenkassistent codieren

[931_2]

Ah du den Knopf meinst du um den ACC abzuschalten. Danke  

Nee leider nein, weder beim aktiven noch abgschalteten ACC funktionierts. Bekomme weiterhin die Meldung "Park Assist zurzeit nicht verfügbar"

Auch der Parkassistens Taster leuchtet nicht, wenn ich diesen betätige?!

[Silviu]

here is my parking assist long coding. and I activated also PLA and is working.

You do not have the required permissions to view the image content in this post.

and here is one without PLA activated 

but are from GC600 

 

[931_2]

Hey Silviu,

many thanks of providing my your coding before and after. At my GC600 the longcode for the STG76 looks differnetto yours!

before = 0C7116D971

after = 0A7116F971

 

 

I did the changes, which was provided by snuggles.

STG 76

Byte 0 Bit 1->1
Byte 0 Bit 2->0

Falls der Trailer Assist vorhanden ist, zusätzlich  Byte 0 Bit 3 setzen

Falls der Lane Assist vorhanden ist, zusätzlich  Byte 3 Bit 5 setzen

 

Had you changed different byte or bits compered to snuggles recommendations?

 

You do not have the required permissions to view the image content in this post.

 

 

 

[Silviu]

I follow the steps as Snuggles said and worked perfect from first try!

I don't have trailer assist option and maybe that's why the long coding is different.

but i changed also 

 

STG 13 ACC 

Byte 03 set bit 0

 

STG 44 steering aid

Byte 0 set bit 1

 

STG A5 Camera

Byte 12 set bit 6

[931_2]

Thank you again Silviu!

Would it be possible you can provide me your long codes from the STG13 (ACC)

I would like it to compare it. Just to be sure. Thank you

 

My is

 

32 01 40 4B 40 EF 84 48 94 9C 81 4D 20 30 85 00 00 00 00 00 00 00 00 00 04

[Silviu]

yes, with pleasure.

this is from my car with coding

You do not have the required permissions to view the image content in this post.

 

and this is from my friend car without coding